2,000W Portable Light Stand, Metal Halide

• 2 1,000-watt light fixtures
• Height adjustable between 5' to 8'
• 25' power cord
• Unit weight 42 lbs.
• Add this light stand to your cart now

4-way Hydraulic Manifold

• Designed to increase efficiency and save energy
• Allows operators to control how much fluid flows between separate components
• Heavy-duty construction
• Effectively delivers hydraulic fluid throughout the system
• Uses: Ideal for regulating flow of liquids between pumps, actuators and other components
• Add this hydraulic manifold to your cart now

55W Explosion-Proof Fluorescent Light, 4 ft.

• Reflectors included for redirection
• 55 watt bulbs
• 4' wide
• Efficient cool white light
• Add this work light to your cart now

Adaptador, broca con máximo SDS a SDS

Adaptador, broca con máximo SDS a junta estriada

Air Chain Hoist, 1.5-3 Tons

• Fácil de utilizar
• Single chain and double chain options for various loads
• For heavy-duty lifting loads
• Control de velocidad variable
• Add this air hoist to your cart now

Air Chain Hoist, 16-20 Tons

• Single and double chain operation
• Ciclo de trabajo ilimitado para una operación continua
• For heavy-duty lifting loads
• Control de velocidad variable
• Uses: Ideal for lifting engine blocks, dies or other equipment with eye bolts
• Add this air hoist to your cart now

Air Chain Hoist, 30 Tons

• Fácil de manejar, mantenimiento reducido
• Ciclo de trabajo ilimitado para una operación continua
• Maximum lifting capacity 60,000 lbs.
• Control de velocidad variable
• Add this air hoist to your cart now

Air Chain Hoist, 50 Tons

• Control de velocidad variable
• Minimum headroom
• For heavy-duty lifting loads
• Fácil de manejar, mantenimiento reducido
• Add this air hoist to your cart now

Air Chain Hoist, 6-12 Tons

• Fácil de utilizar
• Single chain, double chain and reconfigured double chain options for various loads
• For heavy-duty lifting loads
• Control de velocidad variable
• Add this air hoist to your cart now

Air Circulating Fan, 28-36 in.

• Tilts for directional air adjustment
• Ready for floor use
• Lighweight and compact for portability
• Durably constructed for indoor/outdoor use
• Uses: Ideal for cooling and drying jobsite spaces
• Add this air circulating fan to your cart now

Air Concrete Saw, 12-14 in.

• Hand-held operation
• Profundidad de corte de hasta 4”
• Use 12-14" blades
• Low maintenance and easy to operate
• Uses: Ideal for rapid, simple on-site cutting or adjusting building components where pneumatic power is available
• Add this concrete saw to your cart now

Escarificador neumático de concreto, 5 cabezales

• Ideal for removing concrete or epoxy, surface preparation and leveling concrete
• Compact and lightweight walk-behind equipment
• Hasta 3,000 bpm
• Low vibration for reduced strain on operator
• Add this concrete scabbler to your cart now

Air Hacksaw, Heavy-Duty

• Cutting capacity up to 30" pipe diameter
• Disponible con abrazaderas ajustables
• Hasta 350 golpes por minuto
• Pneumatic powered
• Uses: Ideal for cutting through metal piping where pneumatic power is available
• Add this hacksaw to your cart now

Air Hacksaw, Light-Duty

• Liviana y fácil de manejar
• El corte suave y sin rebabas minimiza el esmerilado final
• Velocidad ajustable de hasta 1,200 golpes por minuto
• Pneumatic powered
• Uses: Ideal for cutting through metal piping where pneumatic power is available
• Add this hacksaw to your cart now

Air Hammer Large Cold Chisel, 3/4 in.

• 3/4" diameter
• High-quality steel
• Flat taper point
• Accessory for pneumatic chipping hammers
• Uses: Use for light demolition work for cutting and shaping metal and breaking up rock or grout
• Add this chisel attachment to your cart now

Air Hammer Small Cold Chisel, 1/4 in.

• 1/4" diameter
• High-quality steel
• Flat taper point
• Accessory for pneumatic chipping hammers
• Uses: Use for light demolition work for cutting and shaping metal and breaking up rock or grout
• Add this chisel attachment to your cart now

Air Hammer Small Cold Chisel, 5/8 in.

• 5/8" diameter
• High-quality steel
• Flat taper point
• Accessory for pneumatic chipping hammers
• Uses: Use for light demolition work for cutting and shaping metal and breaking up rock or grout
• Add this chisel attachment to your cart now

Air Impact Socket 1 in. Drive

• 2 1/8" or 54 mm deep
• Heavy-duty hardened steel
• Designed to be used with air equipment
• Torque down or loosen fasteners
• Add this impact socket to your cart now

Air Impact Wrench, 1 in. Drive, #5 Spline

• #5 spline drive
• Comfortable D-handle with inside trigger
• Airflow up to 85 CFM
• Torque down or loosen fasteners quickly
• Add this impact wrench to your cart now

Air Impact Wrench, 1 in. Drive, D-handle

• 1" drive
• Comfortable D-handle outside trigger
• Airflow up to 48 CFM
• Torque down or loosen fasteners quickly
• Add this impact wrench to your cart now

Air Impact Wrench, 1 in. Drive, Pistol Grip

• 1" drive
• Agarre ergonómico de la pistola
• Airflow up to 59 CFM
• Torque down or loosen fasteners quickly
• Add this impact wrench to your cart now

Air Impact Wrench, 1-1/2 in. Drive

• Maximum torque up to 3,500 ft.-lbs.
• Comfortable D-handle with inside trigger
• Airflow up to 95 CFM
• Torque down or loosen fasteners quickly
• Add this impact wrench to your cart now

Air Mover/Dryer, 3-speed, 2,700 Cubic Ft. per Hour

• Three positions for easier drying angles
• Underside drying vent
• Three-speed motor allows for great control over drying
• Built-in power circuit breaker allows for multiple units to work at the same time
• If you’re ready to rent this product, set your location to add it to your cart. If you need assistance, click the orange “Request Information” button to contact a Climate Solutions representative.

Air Mover/Dryer, 3-speed, 2,700 Cubic Ft. per Hour

• Three positions for easier drying angles
• Underside drying vent
• Three-speed motor allows for great control over drying
• Built-in power circuit breaker allows for multiple units to work at the same time
• If you’re ready to rent this product, set your location to add it to your cart. If you need assistance, click the orange “Request Information” button to contact a Climate Solutions representative.

Air Orbital Floor Sander, Hand-held

• El silenciador incorporado sofoca el ruido
• Regulador ajustable para el control de velocidad
• Doble acción para acabados sin remolinos
• Ideal for heavy-duty sanding
• Uses: Ideal for complete leveling and sanding for remodeling or construction purposes
• Add this orbital sander to your cart now

Air Paving Breaker, 30 lb. class

• Ideal for breaking up a few inches of concrete or asphalt
• Standard hex chuck size 1" by 4-1/4"
• Reduced kickback decreases operator fatigue
• Use Cases: Ideal for breaking u p and removing up to a few inches of concrete or asphalt
• Add this pavement breaker to your cart now
• Additional charges apply for points, chisels and miscellaneous tool steel
• United Rentals will contact you to confirm requirements

Air Paving Breaker, 35 lb. class

• Ideal for breaking up a few inches of concrete or asphalt
• Standard hex chuck size 1" x 4-1/4"
• Reduced kickback decreases operator fatigue
• Hasta 1,850 bpm
• Add this pavement breaker to your cart now

Air Paving Breaker, 60 lb. class

• Standard hex chuck size 1-1/4" by 6"
• Air inlet 1/2" male
• Hasta 1,680 bpm
• Use Cases: Ideal for breaking u p and removing up to a few inches of concrete or asphalt
• Add this pavement breaker to your cart now
• Additional charges apply for points, chisels and miscellaneous tool steel
• United Rentals will contact you to confirm requirements

Air Paving Breaker, 90 lb. class

• Standard hex chuck size 1-1/4" x 6"
• Weight 91 lbs.
• Hasta 1,350 bpm
• Use Cases: Ideal for breaking up a few inches of concrete or asphalt
• Add this pavement breaker to your cart now
• Additional charges apply for points, chisels and miscellaneous tool steel
• United Rentals will contact you to confirm requirements

Air Portable Band Saw

• Fast cutting capacity up to 7"x 7"
• Weight as low as 13.66 lbs.
• Velocidad de cuchilla variable hasta 295 RPM
• Manufacturers include Portaband and other popular brands
• Uses: Ideal as your go-to tool for remodeling, construction when working with plates, pipes and other jobsite materials
• Add this band saw to your cart now

Destructor neumático de remaches

• Liviano 30 lb
• Hasta 1,140 bpm
• Air flows between 42-46 CFM at 90 psi
• Use Cases: Remove rivets from walls and bridges for medium demolition work
• Add this rivet buster to your cart now
• Additional charges apply for Tool Steel
• United Rentals will contact you to confirm your requirements

Air Rock Drill Whirlibit, 1-1 5/8 in.

• 1-1 5/8 in.
• Hexagonal shape
• Industrial-strength steel composition
• Heavy-duty metal construction
• Uses: Ideal for drilling dowel holes
• Add this rock drill whirlibit to your cart now

Air Rock Splitter, Heavy Duty

• Unit dimensions 50-3/4″ long
• Size hole required 1-3/4" and 26" deep
• For heavy-duty demolition work
• Vibration-free and lightweight to reduce strain on operator
• Add this rock splitter to your cart now

Air Rotary Hammer Drill, 1-in. Cap

• Up to 1" diameter holes with solid carbide-tipped bits
• Up to 3" diameter holes with carbide core bits
• Water hookup at depth gauge to help protect against bit sparking
• Built-in oiler for air motor
• Add this air rotary hammer drill to your cart

Air Torque Wrench, 3/4 in.

• Sistema de sujeción por estiramiento
• Torque range from 95-1,300 ft.-lbs.
• 24 cfm a 75 psi
• Ergonomic trigger handle
• Uses: Ideal for light construction, automotive or industrial applications
• Add this torque wrench to your cart now

Air Walk-behind Concrete Saw, 12-20 in.

• Profundidad de corte de hasta 8”
• Uses 12"-20" blades
• Low maintenance and easy to operate
• Pneumatic powered
• Uses: Ideal as your go-to tool for remodeling, construction when working with brick, concrete and stone
• Add this concrete saw to your cart now

Air Winch, 10,000 lbs.

• Pulls single line up to 10,000 lbs.
• Required pressure 90 PSI
• Wire rope diameter 1/4" recommended and capacity up to 228'
• Inlet 1/2" and hose size 3/4"
• Add this air winch to your cart now

Air Winch, 2 Tons

• Inlet 1/2" and hose size 3/4"
• Wire rope diameter 1/4" recommended
• Required pressure of 90 PSI
• Pulls single line up to 4,000 lbs.
• Uses: Ideal for lifting or suspending heavy materials and equipment
• Add this air winch to your cart now

Aluminum Gantry Crane, 2 Tons, 10-ft. Span

• Liviana y portátil
• Adjustable lifting height and 10' span
• Fácil de armar
• Durable aluminum construction
• Add this gantry crane to your cart now

Aluminum Gantry Crane, 5 Tons, 6- to 16.5-ft. Span

• Liviana y portátil
• Adjustable lifting height and up to 16' span
• 16,500 lb. load test
• Se desplaza en forma segura con carga completa
• Add this gantry crane to your cart now

Angle Grinder, 4-1/2 in., Cordless, Electric Powered

• Hasta 9,000 rpm
• Mango lateral de 2 o 3 posiciones
• Interruptor de gatillo o de paleta disponibles
• Empuñadura ergonómica
• Uses: Ideal for weld preparation and smoothing, rust removal, deburring and blending
• Add this angle grinder to your cart now

Angle Grinder, Electric-powered, 11,000 rpm, 4 1/2 in.

• 5/8-11" spindle thread
• Multiposition side handle lets you work in tight spaces
• Spindle lock allows for quick and easy wheel changes
• AC/DC capability allows you to work off of most generators and welders
• Add this angle grinder to your cart

Angle Grinder, Electric-powered, 11,000 rpm, 5 in.

• 5/8-11" spindle thread
• Multiposition side handle lets you work in tight spaces
• Spindle lock allows for quick and easy wheel changes
• AC/DC capability allows you to work off of most generators and welders
• Add this angle grinder to your cart

Angle Grinder, Electric-powered, 11,000 rpm, 6 in.

• 5/8-11" spindle thread
• Multiposition side handle lets you work in tight spaces
• Spindle lock allows for quick and easy wheel changes
• AC/DC capability allows you to work off of most generators and welders
• Add this angle grinder to your cart

Angle Grinder, Electric-powered, 6,000-8,500 rpm, 7-7 1/2 in.

• 5/8-11" spindle thread
• Multiposition side handle lets you work in tight spaces
• Spindle lock allows for quick and easy wheel changes
• AC/DC capability allows you to work off of most generators and welders
• Add this angle grinder to your cart

Annular Core Cutter, 1/2 in. by 2 in., Steel

• Cutting depth 2"
• Shank diameter 3/4"
• Cutter diameter 1/2"
• Steel material adds to high-speed efficiency
• Uses: Ideal for drilling holes in steel to reduce need for pre-drilling or step drilling
• Add this annular core cutter to your cart today

Arc Welder 150-amp TIG Inverter, 115/230 Volts

• Barra y TIG
• 115/230 dual voltage
• Fácil de transportar, incluye abrazadera de trabajo
• Disponible con funciones pulsantes
• Uses: Arc welding for light- to medium-duty fabrication
• Add this arc welder to your cart now

Arc Welder, 300 amp Inverter

• MIG, GMAW-P, Barra, TIG, FCAW y CAC-A
• Entrada: single-phase or 3-phase
• Salida: 10 a 35 V, 5 a 400 A
• Smooth, more consistent arc that can be tailored to match application, material, fit-up and welder technique
• Uses: Ideal for worksites where multiple types of metal will need work and versatility is needed for use of stick, MIG, TIG, FCAW, and CAC-A welding
• Add this arc welder to your cart now

Arc Welder, LP/Gas Powered, 250 amp

• 250 amp operation
• Produces stick, TIG, MIG and flux-cored outputs
• Montable en remolques para mayor portabilidad
• Uses: Ideal for construction jobsites, or maintenance/repair applications that demand power where electrical outlets aren’t available
• Add this arc welder to your cart

Bandsaw Floor, 7 in. x12 in., Horizontal/Vertical, Electric Powered

• Ángulos de corte ajustables de 45° a 90°
• Construcción de hierro fundido
• Apagado automático al finalizar el corte
• Electric powered
• Uses: Ideal for ripping wood and cutting irregular shapes
• Add this bandsaw to your cart now

Bandsaw, Floor, 8 in. by 14 in., Hor/Vert, Electric

• Adjustable hydraulic downfeed system
• Heavy-duty geared head transmission for quick speed change<br>
• Easy-access control panel
• Horizontal or vertical
• Uses: Ideal for ripping wood and cutting irregular shapes
• Add this bandsaw to your cart now

Radio de 2 vías con batería de repuesto

Belt Sander, 3 in. by 20 in., Electric Powered

• Variable speed, up to 1,400 surface feet per minute (SFPM) available
• Dust collection receptacle available
• Weight as low as 9 lbs.
• Level, shape and finish wood and other materials
• Uses: Ideal for complete leveling and sanding for remodeling or construction purposes
• Add this belt sander to your cart now

Bench Grinder, 8 in., Electric Powered

• Grinder wheel width 8"
• 3/4 horsepower induction motor, 3,600 RPM
• Rugged cast-iron base
• Restablecimientos de herramientas ajustables
• Uses: Ideal for grinding or buffing pieces on a firm, workbench surface
• Add this bench grinder to your cart now

Broca de carburo de 1 1/2"

Broca de carburo de 1 1/2"

Broca de carburo de 1 1/4"

Broca de carburo de 1 1/8"

Broca de carburo de 1 3/8"

Broca de carburo de 1"

Broca de carburo de 1/2"

Broca de carburo de 1/4"

Broca de carburo de 3/16"

Broca de carburo de 3/4"

Broca de carburo de 3/8"

Broca de carburo de 5/16"

Broca de carburo de 5/8"

Broca de carburo de 7/8"

Broca de carburo de 9/16"

Broca de carburo de distintas medidas

Broca de carburo Sds de 1" X 13"

Broca de carburo Sds de 1" X 16"

Broca de carburo Sds de 1/2" X 12"

Broca de carburo Sds de 1/2" X 18"

Broca de carburo Sds de 1/2" X 4"

Broca de carburo Sds de 1/2" X 6"

Broca de carburo Sds de 1/4" X 12"

Broca de carburo Sds de 1/4" X 4"

Broca de carburo Sds de 1/4" X 6"

Broca de carburo Sds de 3/16" X 12"

Broca de carburo Sds de 3/16" X 4"

Broca de carburo Sds de 3/16" X 7"

Broca de carburo Sds de 3/4" X 12"

Broca de carburo Sds de 3/4" X 16"

Broca de carburo Sds de 3/8" X 22"

Broca de carburo Sds de 3/8" X 4"

Broca de carburo Sds de 3/8" X 6"

Broca de carburo Sds de 3/8" X 8"

Broca de carburo Sds de 5/16" X 6"

Broca de carburo Sds de 5/8" X 13"

Broca de carburo Sds de 5/8" X 22"

Broca de carburo Sds de 5/8" X 6"

Broca de carburo Sds de 5/8" X 8"

Broca de carburo Sds de 5/8" X 9"

Broca de carburo Sds de 7/16" X 4"

Broca de carburo Sds de 7/8" X 10"

Broca de carburo Sds de 7/8" X 16"

Broca de carburo Sds de 7/8" X 6"

Broca de carburo Sds de 9/16" X 10"

Broca de carburo Sds de 9/16" X 4"

Broca de carburo estriada de 1 1/2"

Broca de carburo estriada de 1 1/4"

Broca de carburo estriada de 1 1/8"

Broca de carburo con vástago de 1"

Broca de carburo estriada de 1/2"

Broca de carburo estriada de 1/4"

Broca de carburo estriada de 3 1/2"

Broca de carburo estriada de 3/4"

Broca de carburo estriada de 3/8"

Broca de carburo estriada de 5/8"

Broca de carburo estriada de 7/8"

Broca de carburo estriada de 9/16"

Broca para núcleo de concreto/sds estriada de 2 1/2"

Broca para núcleo de concreto estriada de 3" sds

Broca para núcleo de concreto/sds estriada de 4 1/2"

Broca para núcleo de concreto estriada de 4" sds

Broca para concreto estriada de 1 1/4" X 15-24"

Broca para concreto estriada de 1 1/4" X 4-14"

Broca para concreto estriada de 1 1/8" X 4-14"

Broca para concreto estriada de 1" X 15-24"

Broca para concreto estriada de 1" X 4-14"

Broca para concreto estriada de 1/2" X 4-14"

Broca para concreto estriada de 3/4" X 15-24"

Broca para concreto estriada de 3/4" X 4-14"

Broca para concreto estriada de 3/8" X 4-14"

Broca para concreto estriada de 5/8" X 4-14"

Broca para concreto estriada de 7/8" X 4-14"

Broca para concreto estriada de 9/16" X 4-14"

Broca de núcleo de carburo de 1 3/4"

Broca de núcleo de carburo de 2 1/2"

Broca de núcleo de carburo de 2 3/4"

Broca de núcleo de carburo de 2"

Broca de núcleo de carburo de 3 1/2"

Broca de núcleo de carburo de 3"

Broca de núcleo de carburo de 4"

Broca de núcleo de carburo de 5"

Broca de núcleo de carburo de 6"

Broca de núcleo de diamante de 2 1/2"

Broca de núcleo de diamante de 4"

Broca para taladro Sds Plus de 3/4"

Broca para taladro Sds Plus de 3/8"

Broca hexagonal de 3/4", cincel plano de 1" X 12"

Broca carburada para roca con rosca D de 1 1/2"

Broca carburada para roca con rosca D de 1 1/4"

Broca carburada para roca con rosca D de 1 3/4"

Broca carburada para roca con rosca D de 1 5/8"

Broca carburada para roca con rosca D de 1 7/8"

Broca carburada para roca con rosca D de 2 1/2"

Broca carburada para roca con rosca D de 2"

Broca carburada para roca con rosca D de 3"

Broca carburada para roca con rosca H de 1 1/2"

Broca carburada para roca con rosca H de 1 3/4"

Broca carburada para roca con rosca H de 1 3/8"

Broca carburada para roca con rosca H de 1 5/8"

Broca carburada para roca con rosca H de 1 7/8"

Broca carburada para roca con rosca H de 2 1/2"

Broca carburada para roca con rosca H de 2 1/4"

Broca carburada para roca con rosca H de 2"

Broca carburada para roca con rosca H de 3"

Broca para martillo rotatorio de 1 1/4"

Martillo rotatorio con broca de 1"

Broca para martillo rotatorio de 11/16"

Broca para martillo rotatorio de 2"

Broca para martillo rotatorio de 3/4"

Broca para martillo rotatorio de 3/8"

Broca para martillo rotatorio de 5/8" X 10"

Broca para martillo rotatorio de 5/8" X 16"

Broca para martillo rotatorio de 7/8"

Broca para martillo rotatorio de 9/16"

Broca para martillo rotatorio de 9/16"

Broca sds max de 1 1/2" X 22 1/2"

Broca sds max de 1 1/4" X 10"

Broca sds max de 1 1/4" X 16"

Broca sds max de 1 1/4" X 18"

Broca sds max de 1 1/4" X 8"

Broca sds max de 1 1/8" X 10"

Broca sds max de 1 1/8" X 14"

Broca sds max de 1 1/8" X 18"

Broca sds max de 1 1/8" X 22 1/2"

Broca sds max de 1 3/4" X 18"

Broca sds max de 1 3/8" X 18"

Broca sds max de 1/2" X 12"

Broca sds max de 2" X 18"

Broca sds max de 3/4" X 12"

Broca sds max de 3/4" X 16"

Broca sds max de 3/4" X 31"

Broca sds max de 3/4" X 8"

Broca sds max de 5/8" X 12"

Broca sds max de 5/8" X 16"

Broca sds max de 5/8" X 18"

Broca sds max de 5/8" X 8"

Broca sds max de 7/8" X 8"

Broca sds max de 9/16" X 12"

Broca sds max de 9/16" X 16"

Broca sds max de 9/16" X 8"

Block Saw, 14 in., Gas Powered

• Fácil de instalar y transportar
• Profundidad de corte máxima de 5”
• Up to 5.5 horsepower engine
• Cuchilla de 14”
• Uses: Ideal as your go-to tool for remodeling, construction when working with brick and stone; personal and commercial use
• Add this block saw to your cart now

Llave de cubo de 3 1/8", cerrada

Breaker Bar, 1 in. Drive

• 1" drive
• Loosen stubborn bolts or other fastenings
• Heavy-duty steel with chrome polishing
• Works with 1" drive sockets
• Add this breaker bar to your cart now

Breaker Bar, 1/2 in. Drive

• 1/2" drive
• Loosen stubborn bolts or other fastenings
• Heavy-duty steel with chrome polishing
• Works with 1/2" drive sockets
• Add this breaker bar to your cart now

Breaker Bar, 3/4 in. Drive

• 3/4" drive
• Loosen stubborn bolts or other fastenings
• Heavy-duty steel with chrome polishing
• Works with 3/4" drive sockets
• Uses: Go-to tool on the jobsite when high-torque fasteners are installed and need to be removed
• Add this breaker bar to your cart now

Cable Puller, 10,000 lbs., Electric Powered

• Pulling speed up to 16 feet per minute (FPM) at no load
• Mobile boom accessory available
• Features high and low pulling speeds
• Easily change speeds with foot pedal
• Uses: Ideal for pulling cable through conduit for electrical or communication utilities work
• Add this cable puller to your cart now

Chain Hoist, 1-2 Tons, Electric Powered

• Wear-resistant, nickel-plated load chains
• Adjustable lifting speed
• Plug-in pendant and connectors available
• Maximum lifting capacity 4,000 lbs.
• Add this electric hoist to your cart now

Chain Hoist, 15 Tons, Manual

• Maximum capacity 30,000 lbs.
• Estructura de acero resistente
• Corrosion-resistant steel
• Protección contra sobrecarga disponible
• Add this manual hoist to your cart now

Chain Hoist, 3 Tons, Electric Powered

• Lift speed of up to 5.5 feet per minute (FPM)
• Bajo o alto voltaje
• Disponible con ganchos de acero forjado
• Maximum capacity 6,000 lbs.
• Uses: Ideal for lifting heavy materials and equipment
• Add this electric hoist to your cart now

Llave de cadena para tubos de 12"

Llave de cadena para tubos de 24"

Llave de cadena para tubos de 36"

Chain Wrench, Large

• Multi-use tool
• Available in multiple sizes
• Heavy-duty construction
• Fácil de usar
• Uses: Ideal for holding or rotating smooth objects
• Add this chain wrench to your cart now

Circular Saw, 16 in., Electric Powered

• Cuchilla con punta carburada de 16-5/16"
• 15 amp motor and electric brake
• Profundidad de corte a 90 grados: 6-3/16"
• We have various blade types available
• Uses: Ideal as your go-to tool for remodeling, construction when working with wood, brick and stone; personal and commercial use
• Add this circular saw to your cart now

Circular Saw, 7-1/4 in., Cordless, Electric Powered

• Cuchilla con punta de carbono de 7-1/4"
• Profundidad de corte a 90 grados: 2-7/16"
• Cambio rápido y sencillo de las cuchillas
• We have various blade types available
• Uses: Ideal as your go-to tool for remodeling, construction when working with wood, brick and stone; personal and commercial use
• Add this circular saw to your cart now

Circular Saw, 7-1/4 in., Electric Powered

• 15 amp motor, electric brake included
• Depth of cut 2-7/16" at 90 degrees
• Cuchilla de 7 1/4”
• We have various blade types available
• Uses: Ideal as your go-to tool for remodeling, construction when working with wood, brick and stone; personal and commercial use
• Add this circular saw to your cart now

Circular Saw, 7-1/4 in., Worm Drive, Electric Powered

• Hand-held operation
• Protector inferior antienganches para mayor seguridad
• Empuñadura blanda texturada para comodidad del operador
• Worm drive designed to give saw more torque than sidewinder saws
• Uses: Ideal for cutting through wood, stone and other materials where electric power is available
• Add this circular saw to your cart now

Circular Saw, 8 in., Metal, Electric Powered

• Outfitted to cut through metal materials
• Cuchilla de 8"
• Portable and easy to transport
• We have various blade types available
• Uses: Ideal as your go-to tool for remodeling, construction when working with wood, brick and stone; personal and commercial use
• Add this circular saw to your cart now

Alicates en C de 10", estándar

Alicates en C de 12", estándar

Alicates en C de 3", estándar

Alicates en C de 4", estándar

Alicates de cuello profundo de 6", en C

Alicates en C de 6", estándar

Alicates de cuello profundo de 8", en C

Alicates en C de 8", estándar

Prensa tipo barra

Tornillo de banco para soldadura de 9"

Cold Chisel, 1/2 in.

• Designed for metal work
• 1/2" chisel width, length depends on model
• Heavy-duty hardened steel
• Accessory for air equipment
• Add this cold chisel to your cart now

Tirador de 1 1/2 toneladas

• Control y operación sencillos, con una sola mano
• Su diseño resistente y ligero la hace fácil de transportar y enganchar hasta en los espacios más reducidos.
• Su mecanismo de encadenamiento libre permite colocar y ajustar rápidamente la cadena suelta. Está diseñada para no engancharse accidentalmente mientras se esté cargando.
• El engranaje de reducción doble, junto con el mango corto y acolchonado permiten manejarla fácilmente con mínimo esfuerzo.
• El bloque de ganchos superior y el inferior están atornillados para facilitar su inspección y retiro y tienen pestillos de seguridad como norma
• Está fabricada de acero en relieve resistente a impactos con una capa de acabado en polvo como protección adicional cuando se trabaja en ambientes hostiles.
• El freno de carga tipo Weston integrado se mantiene limpio y seco para colocar la carga en forma positiva.
• Cumple con la norma ASME B30.21
• Cadena chapada en zinc 100 % probada con carga
• Limitador de carga

Tirador de 3 toneladas

• Su diseño resistente y ligero la hace fácil de transportar y enganchar hasta en los espacios más reducidos.
• Su mecanismo de encadenamiento libre permite colocar y ajustar rápidamente la cadena suelta. Está diseñada para no engancharse accidentalmente mientras se esté cargando.
• El engranaje de reducción doble, junto con el mango corto y acolchonado permiten manejarla fácilmente con mínimo esfuerzo.
• Está fabricada de acero en relieve resistente a impactos con una capa de acabado en polvo como protección adicional cuando se trabaja en ambientes hostiles.
• El freno de carga tipo Weston integrado se mantiene limpio y seco para colocar la carga en forma positiva.
• Cumple con la norma ASME B30.21
• El bloque de ganchos superior y el inferior están atornillados para facilitar su inspección y retiro y tienen pestillos de seguridad como norma
• Cadena chapada en zinc 100 % probada con carga

Tirador de 6 toneladas

• Su diseño resistente y ligero la hace fácil de transportar y enganchar hasta en los espacios más reducidos.
• Su mecanismo de encadenamiento libre permite colocar y ajustar rápidamente la cadena suelta. Diseñado para que la cadena no se suelte accidentalmente durante la carga
• El engranaje de reducción doble, junto con el mango corto y acolchonado permiten manejarla fácilmente con mínimo esfuerzo.
• Está fabricada de acero en relieve resistente a impactos con una capa de acabado en polvo como protección adicional cuando se trabaja en ambientes hostiles.
• El freno de carga tipo Weston integrado se mantiene limpio y seco para colocar la carga en forma positiva.
• El bloque de ganchos superior y el inferior están atornillados para facilitar su inspección y retiro y tienen pestillos de seguridad como norma
• Limitador de carga
• Cumple con la norma ASME B30.21

Compound Miter Power Saw, Electric-powered, 12 in.

• Single bevel
• Stainless-steel miter detent plate and cam miter lock
• 4,000 rpm
• 15-amp motor
• Add this compound miter power saw to your cart

Concrete Core Drill, 17-23 amps, Electric Powered

• Drills up to 10" holes in concrete
• Montada sobre el equipo
• 17-23 amps
• Built-in rollers for maneuverability
• Add this concrete core drill to your cart now

Concrete Cut-off Saw, 14 in., Gas Powered

• Profundidad de corte de hasta 4.9”
• Diseño de baja vibración
• Disponible con mangos ajustables
• Suitable for indoor or outdoor cutting
• Uses: Ideal as your go-to tool for remodeling, construction when working with brick, concrete and stone
• Add this concrete saw to your cart now

Concrete Vibrator, 1-2 HP, Electric Powered

• 1-2 horsepower
• Lightweight and rugged
• Dust and waterproof switch
• Head sizes from 1-2.75 in. in diameter and flex shaft lenths from 3-30 ft.
• Uses: Ideal for use in low-slump concrete where consistent power is needed to move stiff mixtures
• Add this electric concrete vibrator to your cart now

Conduit Bender, 1-1/4 in. to 5 in., Powered

• Los componentes fuertes pueden manejar tubos de 1-1/4" - 5"
• Báscula para desplazamiento del pistón fácil de usar
• Idóneo para hacer codos, ajustes y monturas
• Durable steel jaws
• Uses: Ideal for bending conduit, cable or tubes for elbows, offsets and saddles between 1-1/4" to 5" gauge
• Add this conduit bender to your cart now

Conduit Bender, 1/2 in. to 2 in., Powered

• Strong components can handle 1/2"-2" tubing
• Ruedas integradas para maniobrarlo con facilidad en el lugar de trabajo
• Liviano pero duradero, diseñado para servicio pesado
• Deluxe design
• Uses: Ideal for bending conduit, cable or tubes for elbows, offsets and saddles between 1/2" to 2" gauge
• Add this conduit bender to your cart now

Cordless Drill, Electric-powered, 1/2 in., 18V

• Gatillo avanzado de velocidad variable
• Portabrocas metálico de 1/2"
• Liviano, portátil y fácil de operar
• 1,800 rpm
• Add this cordless drill to your cart

Cordless Impact Right-angle Drill Driver, Lithium Ion, Dual-speed, 3/8 in.

• Compact design for easy reach in tight spaces
• Dual speed 0-650/0-2,000
• 3/8" chuck with deep hex pocket
• Multigrip trigger provides comfort and convenience
• Add this cordless impact right-angle drill driver to your cart

Cordless Portable Band Saw, Electric-powered

• 3 1/4 in. X 3 1/4 in. max. capacity (rectangular)
• Cuts: 2 1/2 in. conduit, 3 in. angle iron, 3 in. copper
• Perfect tool for cutting metal in place, overhead or in tight spaces
• Baja vibración
• Add this cordless portable band saw to your cart

Crowfoot Wrench Socket 1/2 in. Drive

• 1 13/16" or 46 mm deep
• Heavy-duty hardened steel
• Designed to be used with torque wrenches
• Torque down or loosen fasteners
• Add this crowfoot socket to your cart now

Cortacables, blando, 2" 28", mango de trinquete

Demolition Breaker Hammer, 70 lbs., Electric Powered

• Single-impact energy; weighs 49 lbs.
• Lowest hand-arm vibration in weight class
• Universal motor with protective insulation
• Heavy-duty construction
• Uses: Ideal for breaking and demolition of cement, rock and asphalt
• Add this demo hammer to your cart now

Demolition Breaker Hammer, Electric-powered, 60 lbs.

• 60 lbs. estimated energy impact
• Vibration-dampened controls for easy operation
• 10-gauge extension cord required for operation
• Use Cases: Designed for breaking concrete slabs, floors, walls, sidewalks, stones, brickwork, frozen ground, heavy clay and asphalt
• Add this demolition breaker hammer to your cart
• Additional charges apply for points, chisels and miscellaneous tool steel
• United Rentals will contact you to confirm requirements

Demolition Breaker Jack Hammer Kit, Electric-powered, 35 lbs.

• 35 lbs. impact force
• Versatile two-way bit accepts 1 1/8" hex steel and standard 1 1/8" air steel
• Vibration control technology shock reduction in hammer mechanism and at handle
• Carrying case with wheels offers convenient storage and easy transportation
• Add this demolition breaker jack hammer kit to your cart

Demolition Hammer Tile Stripping Cart, 35 lb. Weight Class

• Multiposition, foldable operator handle
• Fits popular models from Bosch, DEWALT, Hilti, Hitachi and Makita
• 12" maximum blade-cutting width
• Use Cases: Mounts to a wide range of 35 lb. weight class electric breaker, not included
• Add this demolition hammer tile stripping cart to your cart
• United Rentals will contact you to confirm availability and price of demolition hammer

Demolition Hammer, Electric-powered, 15.5 lbs. Single Impact Energy

• 1,890 impacts per minute
• Optimized performance-to-weight ratio for high productivity
• Ideal for heavy demolition on masonry and brick walls and removing plaster and tile
• Active vibration reduction makes the tool less tiring to use
• Add this demolition hammer to your cart

Demolition Hammer, Electric-powered, 8.5 lbs. Single Impact Energy

• Hasta 2760 ipm
• Optimized performance-to-weight ratio for high productivity
• Ideal for heavy demolition on masonry and brick walls and removing plaster and tile
• Active vibration reduction makes the tool less tiring to use
• Add this demolition hammer to your cart

Diffuser Balloon Light With Stand, 400 Watt

• Single 400 watt lamp (34,000 lumens)
• 360-degree glare-free lighting
• Air-assist mast-lowering system protects light bulb
• Quick and easy setup; balloon inflates in less than 30 seconds
• Add this diffuser balloon light with stand to your cart

Diffuser Balloon Light With Stand, LED Lamp

• Diffuser is constructed of heat- and water-resistant UV-protected nylon
• 360-degree glare-free lighting
• Air-assist mast-lowering system protects light bulb
• Quick and easy setup; balloon inflates in less than 30 seconds
• Add this diffuser balloon light with stand to your cart

Disc Grinder, 5 in., Electric Powered

• Comfortable wraparound auxiliary handle
• Dustless shroud included
• Liviana y portátil
• Grinder wheel width 5"
• Uses: Ideal for weld preparation and smoothing, rust removal, deburring and blending
• Add this grinder to your cart now

Drill Press Magnetic 1-1/2 in., Electric Powered

• Versatile, MT 3 capable, uses 3/4" shank cutters
• Up to 450 rpm, 115 to 120V electric powered
• Smart Magnet™ circuitry for safe drilling on marginal surfaces
• Use Cases: Magnetic base drilling
• Add this magnetic base drill press to your cart
• Rental does not include drill bits
• United Rentals will contact you to confirm your requirements

Drill Press, 1/2-1 in.

• Exactitud, estabilidad y versatilidad
• Transmisión por correa o velocidad variable
• Column-to-spindle distance: 7 1/2-10 in.
• Heavy-duty construction
• Uses: Ideal for drilling metal as well as threading, reaming and countersinking applications
• Add this drill press to your cart now

Drill Press, Magnetic Base, 1/2 in., Pneumatic Powered

• Pneumatic powered
• Magnetic holding strength: 1,600 lb
• Liviana y portátil
• Heavy-duty construction
• Uses: Ideal for drilling metal as well as threading, reaming and countersinking applications
• Add this drill press to your cart now

Drill Press, Magnetic, 3-4 in.

• Drills holes from 7/16-2 3/8 in.
• Easy-to-change feed side
• Dos velocidades disponibles
• Heavy-duty construction
• Uses: Ideal for drilling metal as well as threading, reaming and countersinking applications
• Add this drill press to your cart now

Drill Steel, 18 in. Shaft, Integral H Thread Bit

• 18" shaft
• Fast and efficient drilling
• Heat-treated, high-quality steel
• Heavy-duty industrial work
• Uses: Ideal for mining, construction and hard rock drilling
• Add this drill steel to your cart

Drill Steel, 24 in. Shaft

• 24" shaft
• Fast and efficient drilling
• Heat-treated, high-quality steel
• Heavy-duty industrial work
• Uses: Ideal for mining, construction and hard rock drilling
• Add this drill steel to your cart

Drill Steel, 48 in. Shaft

• 48" shaft
• Fast and efficient drilling
• Heat-treated, high-quality steel
• Heavy-duty industrial work
• Uses: Ideal for mining, construction and hard rock drilling
• Add this drill steel to your cart

Drill, 1/2 in., Electric Powered

• Compacto y duradero
• Portabrocas con llave, disponible hasta 3/8"
• RPM de una o dos velocidades
• Two-postion pipe handle
• Uses: Ideal for making holes in wood large enough to accomdate piping
• Add this drill to your cart now

Drop Light, Explosion Proof, 110V Electric Powered

• Durable construction designed to not shatter
• Ideal for temporary indoor or outdoor work lighting
• Extra long power cord
• Plugs into a standard outlet
• Add this work light to your cart now

Electric Drill, 3/4 in., Top and D-handle

• 3/4" chuck
• 10-amp motor, 375 no load rpm
• Triple gear reduction
• Full-power forward and reverse
• Add this electric drill to your cart

Martillo eléctrico rotatorio, husillo grande

• Liviano para la comodidad del operador
• Alto impacto con mínima vibración
• Mango auxiliar para mayor estabilidad
• Requires 110V and 10 amps
• Uses: Ideal for breaking through concrete, asphalt, brick and stone
• Add this rotary hammer to your cart now

Evaporative Cooling Fan, 12 in.

• Portable and durable
• 12" de diámetro
• Fluid air circulation for efficient cooling
• Electric powered
• Uses: Ideal for efficient spot cooling in warm business, construction or industrial spaces
• If you’re ready to rent this product, set your location to add it to your cart. If you need assistance, click the orange “Request Information” button to contact a Climate Solutions representative.

Evaporative Cooling Fan, 16-18 in.

• Diameter 16"-18"
• Caster wheels available for portability
• Ideal for portable cooling jobsites
• Manufacturers include Portacool Evaporative Coolers and other popular brands
• Uses: Ideal for efficient spot cooling in dry climates
• Add this portable cooling fan to your cart now

Evaporative Cooling Fan, 36 in., Explosion Proof

• Diameter 36" for heavy-duty spot cooling
• Ideal for portable cooling jobsites
• Manufacturers include Portacool Evaporative Coolers and other popular brands
• Uses: Ideal for efficient spot cooling in dry climates
• Add this portable cooling fan to your cart now

Evaporative Cooling Fan, 48 in.

• Diameter 48" for heavy-duty spot cooling
• Caster wheels available for portability
• Ideal for portable cooling jobsites
• Manufacturers include Portacool Evaporative Coolers and other popular brands
• Uses: Ideal for efficient spot cooling in dry climates
• If you’re ready to rent this product, set your location to add it to your cart. If you need assistance, click the orange “Request Information” button to contact a Climate Solutions representative.

Evaporative Cooling Trailer

• Portable for convenient relocation
• Come in various sizes
• Industrial strength for durability
• Misting fans included
• Uses: Ideal for efficient spot cooling on construction or industrial jobsites
• Add this trailer to your cart now

Flange Spreader Toe Ratchet, 15 Ton

• 15-ton capacity
• Heavy-duty and reliable
• Sturdy steel wedge for safe splitting
• Easy to control
• Uses: Spreading or separating heavy pipe flanges for petrochemical, refining, pipeline, power generation and other applications
• Add this flange spreader jack to your cart now

Flange Spreader Toe Ratchet, 5 Ton

• 5-ton capacity
• Heavy-duty and reliable
• Sturdy steel wedge for safe splitting
• Liviana y fácil de usar
• Uses: Spreading or separating heavy pipe flanges for petrochemical, refining, pipeline, power generation and other applications
• Add this flange spreader jack to your cart now

Flange Spreader Wedge, Hydraulic, 14 Ton

• 14-ton capacity
• Heavy-duty and reliable
• Sturdy steel wedge for safe splitting
• Easy to control
• Uses: Spreading or separating heavy pipe flanges for petrochemical, refining, pipeline, power generation and other applications
• Add this hydraulic flange spreader jack to your cart now

Flange Spreader Wedge, Hydraulic, 25 Ton

• 25-ton capacity
• Heavy-duty and reliable
• Sturdy steel wedge for safe splitting
• Easy to control
• Uses: Spreading or separating heavy pipe flanges for petrochemical, refining, pipeline, power generation and other applications
• Add this hydraulic flange spreader jack to your cart now

Flange Spreader, Hydraulic, 5 Ton, Toe Type

• 5-ton capacity
• Heavy-duty and reliable
• Sturdy steel wedge for safe splitting
• Easy to control
• Uses: Spreading or separating heavy pipe flanges for petrochemical, refining, pipeline, power generation and other applications
• Add this hydraulic flange spreader jack to your cart now

Gravity Assist Tool Support Arm

• Attaches to racks, mounts or lifts for elevated work
• Tool arm is easily maneuverable and ergonomic
• Let the gravity assist tool arm do the heavy lifting
• Securely holds tool, decreasing risk of drops
• Uses: Ideal for supporting power tools as you work to reduce risk of injury
• Add this gravity assist tool support arm to your cart

Hacksaw, Manual

• Liviana y fácil de manejar
• Designed for light-duty cutting
• Ideal for cutting metal
• Multiple saw lengths available
• Uses: Ideal for cutting through narrow metal piping or other materials manually
• Add this hacksaw to your cart now

Martillo de boca bombeada de 12 oz

Martillo de boca bombeada de 16 oz

Martillo de boca bombeada de 24 oz

Martillo de boca bombeada de 32 oz

Martillo de boca bombeada de 32 oz de latón

Martillo de boca bombeada de 48 oz

Martillo de boca bombeada de 8 oz

Punta de martillo cincel de 18"

Martillo de orejas

Martillo de orejas, curvo, 20 oz

Maza

Mazo N.º 10

Mazo N.º 10 de latón

Mazo N.º 11.5, policarbonato

Mazo N.º 12

Mazo N.º 15 de latón

Mazo N.º 16

Mazo N.º 2, acero

Mazo N.º 20

Mazo N.º 3 de latón

Mazo N.º 3, policarbonato

Mazo N.º 3, acero

Mazo N.º 4

Mazo N.º 4 de latón

Mazo N.º 5 de latón

Mazo N.º 6

Mazo N.º 6 de latón

Mazo N.º 7.5 de latón

Mazo N.º 8

Mazo N.º 8 de latón

Martillo para soldador, desbaste, mango de alambre

Hand Saw, Carpentry

• Liviana y fácil de manejar
• D-handle with comfortable grip
• Designed for woodcutting
• Blade lengths vary
• Uses: Ideal for woodwork and construction
• Add this hand saw to your cart now

Hand-held Rotary Bristle Tool, Electric Powered

• Powerful bristle brush for hard-to-reach areas
• Removes corrosion and coating without grinding
• Imparts profile of 2.7- 3.3 mil
• Designed for use on metal pieces
• Uses: Ideal for removing coatings or corrosion from metal in narrow areas
• Add this bristle tool to your cart now

Sierra neumática de mano para concreto, 14 a 18"

• Profundidad de corte de hasta 7"
• Uses 12-18 in. blades
• Low maintenance and easy to operate
• Ideal for indoor and outdoor use
• Uses: Ideal for cutting concrete, brick, asphalt and other solid materials
• Add this handheld saw to your cart today

Handheld Die Grinder, Electric-powered, 1 1/2 in., 25,000 rpm

• 25,000 rpm no load speed
• 4.2 amps
• AC/DC capacity works off welding machines and generators for increased productivity and versatility
• 1/4" collet spindle thread
• Add this handheld die grinder to your cart

Handheld Die Grinder, Electric-powered, 2 in., 19,000 rpm

• 19,000 rpm no load speed
• 5 amps
• AC/DC capacity works off welding machines and generators for increased productivity and versatility
• 1/4" collet and 1/8" sleeve spindle thread
• Add this handheld die grinder to your cart

Handheld Explosion-Proof Light, Inline Transformer

• Step down transformer
• Durable glass dome and cage
• Long power cord length
• Portable and lightweight
• Add this work light to your cart now

Handheld Variable High-speed Drill, 1/2 in.

• Variable speed and soft grip trigger, with reversing switch for greater control
• Two-finger trigger design and lock-on button for ease of operation
• 360°-auxiliary handle with optional depth gauge
• Ergonomic handle with soft grip for increased comfort
• Add this handheld variable high-speed drill to your cart

Hands-off Chisel and Punch Grip Holder

• Ergonomical holder minimizes awkward hand positioning for comfort
• Keeps hands safely away from point of contact
• Spark resistant
• Adjustable screw handle to accommodate chisel and punch sizes
• Uses: Ideal for use when needing a chisel or punch for breaking chain, rivet busting, or hole punches in wood, masonry and metalworking
• Add this hands-off chisel and punch grip holder

Hole Saw Kit, 1/2 in.-4 in.

• Designed to saw holes in wood, metal or plastic
• Designed to saw holes in wood, metal or plastic
• Wear-resistant and durable
• Ideal for cutting holes for doorknobs and similar
• Uses: Ideal for sawing holes for doorknobs or for conduit
• Add this hole sawing kit to your cart now

Llave dinamométrica hidráulica para mangueras de 15'

Hydraulic Hole Punch Set, 25-35 Tons

• Includes various diameter pieces
• Wear-resistant and durable
• Ideal for punching holes in metal and other tough materials
• Requires hydraulic power
• Uses: Ideal for punching holes in metal and other materials in various diameters
• Add this hole punch tool to your cart now

Hydraulic Nut Splitter, 0.94-1.13 in.

• Hex size range from 0.94-1.13 in.
• 15-ton nominal capacity
• Breaks apart corroded or frozen nuts with ease
• Heavy-duty construction
• Uses: Ideal for breaking corroded or damaged nuts to free the bolt
• Add this hydraulic nut splitter to your cart now

Hydraulic Nut Splitter, 1.13-1.56 in.

• Hex size range from 1.13-1.56 in.
• 20-ton nominal capacity
• Breaks apart corroded or frozen nuts with ease
• Heavy-duty construction
• Uses: Ideal for breaking corroded or damaged nuts to free the bolt
• Add this hydraulic nut splitter to your cart now

Impact Socket Adapter, 1 in. Drive (F) to #5 Spline Drive (M)

• Strong, heavy-duty steel
• Enables #5 spline drive tools to use 1" drive accessories
• Designed for #5 drive ratchet, extension or torque wrench
• United Rentals will contact you to confirm requirements
• Uses: Ideal for light- to medium-duty construction, automotive or industrial applications
• Add this impact socket adapter to your cart now

Impact Socket Adapter, 1/2 in. Drive (F) to 3/4 in. Drive (M)

• Strong, heavy-duty steel
• Enables 3/4" drive tools to use 1/2" drive accessories
• Designed for 3/4" drive ratchet, extension or torque wrench
• United Rentals will contact you to confirm requirements
• Uses: Ideal for light- to medium-duty construction, automotive or industrial applications
• Add this impact socket adapter to your cart now

Impact Socket Adapter, 3/4 in. Drive (F) to 1/2 in. Drive (M)

• Strong, heavy-duty steel
• Enables 1/2" drive tools to use 3/4" drive accessories
• Designed for 1/2" drive ratchet, extension or torque wrench
• United Rentals will contact you to confirm requirements
• Uses: Ideal for light- to medium-duty construction, automotive or industrial applications
• Add this impact socket adapter to your cart now

Impact Socket Adapter, 3/8 in. Drive (F) to 1/2 in. Drive (M)

• Strong, heavy-duty steel
• Enables 1/2" drive tools to use 3/8" drive accessories
• Designed for 1/2" drive ratchet, extension or torque wrench
• United Rentals will contact you to confirm requirements
• Uses: Ideal for light- to medium-duty construction, automotive or industrial applications
• Add this impact socket adapter to your cart now

Impact Wrench, 1 in., Electric Powered

• Up to 738 ft.-lbs. of torque in forward or reverse
• Agarre ergonómico para la comodidad del operador
• 1,500 bpm impact system for less vibration
• Livianas, portátiles y fáciles de usar
• Uses: Ideal for torqueing and loosening bolts and other fasteners with 1" drive
• Add this impact wrench to your cart now

Impact Wrench, 1/2 in., Cordless Electric Powered

• Up to 450 ft.-lbs. of torque
• Liviana y portátil
• Up to 3,000 beats per minute, variable speed trigger available
• Agarre ergonómico de la pistola
• Uses: Ideal for torqueing and loosening bolts and other fasteners with 1/2" drive
• Add this impact wrench to your cart now

Impact Wrench, 3/4 in., Cordless Electric Powered

• Between 200-345 ft.-lbs. of torque
• Liviana y portátil
• Ideal for torqueing fasteners like nuts and bolts
• Agarre ergonómico de la pistola
• Uses: Ideal for torqueing and loosening bolts and other fasteners with 3/4" drive
• Add this impact wrench to your cart now

Impact Wrench, 3/4 in., Electric Powered

• Up to 450 ft.-lbs. of torque in forward or reverse
• Livianas, portátiles y fáciles de usar
• Agarres de mango y lateral ergonómicos para la comodidad del operador
• Uses: Ideal for torqueing and loosening bolts and other fasteners with 3/4" drive
• Add this impact wrench to your cart now

Impact Wrench, 3/8 in., Cordless Electric Powered

• Between 200-345 ft.-lbs. of torque
• Liviana y portátil
• Ideal for torqueing fasteners like nuts and bolts
• Agarre ergonómico de la pistola
• Uses: Ideal for torqueing and loosening bolts and other fasteners with 3/8" drive
• Add this impact wrench to your cart now

Industrial Pedestal Fan, 24 in.

• Diameter 24" for medium-duty spot cooling
• Oscillating models available
• Ideal for cooling indoor jobsites
• Footprint can fit in a narrow area compared to comparable box fans
• Uses: Ideal for spot cooling warehouses or indoor jobsites
• Add this fan to your cart now

Industrial Pedestal Fan, 30 in.

• Diameter 30" for medium-duty spot cooling
• Oscillating models available
• Ideal for cooling indoor jobsites
• Footprint can fit in a narrow area compared to similar box fans
• Uses: Ideal for spot cooling
• Add this fan to your cart now

Jigsaw, Cordless, Electric Powered

• Sistema para cambiar cuchillas sin herramientas
• La palanca para expulsar la cuchilla elimina la necesidad de tocar la cuchilla caliente
• Liviana, fácil de usar y portátil
• Ideal for cutting angles and curves in wood or metal
• Uses: Ideal as your go-to tool for remodeling, construction when working with wood, brick and stone; personal and commercial use
• Add this jigsaw to your cart now

Jigsaw, Electric Powered

• Sistema para cambiar cuchillas sin herramientas
• La palanca para expulsar la cuchilla elimina la necesidad de tocar la cuchilla caliente
• Liviana, fácil de usar y portátil
• Ideal for cutting angles and curves in wood or metal
• Uses: Ideal for cutting curves or angles when electric power is available
• Add this jigsaw to your cart now

Nivel láser

• Precisión de nivelación de 1/16" en 100'
• Hand-held or rod-mounted receiver, machine mountable
• Convenient, one-person operation
• Durable and resistant to breaks even at falls from 5' height
• Uses: Ideal for measuring elevation, angles of excavations and concrete pours
• Add this laser level to your cart now

LED Light Stand, 1 by 150W, Explosion Proof

• High efficiency LED bulbs
• Directional lighting
• A prueba de explosiones
• Heavy-duty metal construction
• Uses: Ideal for lighting a construction jobsite or event at night and adding lighting during a planned shutdown
• Add this light stand to your cart now

Machine Skate, 15 Tons

• Low-profile, high-capacity rollers with endless chain action design
• Aditamentos de eslabones giratorios incluidos
• Fácil de utilizar
• Cumple con las normas ANSI
• Add this machine skate to your cart now

Magnetic Base Drill Press, 2-in. Driller Depth

• 2-3" cutter drilling depth, 1 1/2" cutter diameter"
• Uniform-torque motor for demanding core drilling
• 2 1/2" stroke
• Fabricación sólida y resistente en aluminio moldeado a presión para trabajar en condiciones difíciles
• Add this magnetic base drill press to your cart

Magnetic Base Drill Press, 2-in. Driller Depth

• 2" drilling depth, 1 1/16" core bit diameter
• 2-speed gearbox with continuously variable electronic speed reduction
• 5.3-12.2" stroke available
• Low-profile design for drilling in close quarters
• Add this magnetic base drill press to your cart

Manual Chain Hoist, 1 Ton

• Limitador de carga
• La cadena reforzada para sujetar la carga proporciona mayor fuerza y resistencia al desgaste que alargan su vida útil
• Designed for easy inspection and maintenance
• 360-degree swivel hooks with safety latches for positive load engagement
• Add this chain hoist to your cart now

Manual Chain Hoist, 1.5 Ton

• Includes load limiter
• La cadena reforzada para sujetar la carga proporciona mayor fuerza y resistencia al desgaste que alargan su vida útil
• Designed for easy inspection and maintenance
• 360-degree swivel hooks with safety latches for positive load engagement
• Uses: Ideal for lifting heavy loads in manufacturing, agriculture, construction and more
• Add this chain hoist to your cart now

Manual Chain Hoist, 2 Tons

• Estructura de acero resistente
• Resistente a la corrosión
• Cadena de carga y ganchos de acero
• Protección contra sobrecarga disponible
• Uses: Ideal for lifting heavy loads in manufacturing, agriculture, construction and more
• Add this chain hoist to your cart now

Manual Chain Hoist, 3 Tons

• Estructura de acero resistente
• Resistente a la corrosión
• Cadena de carga y ganchos de acero
• Protección contra sobrecarga disponible
• Add this chain hoist to your cart now

Manual Chain Hoist, 5 Tons

• Estructura de acero resistente
• Resistente a la corrosión
• Cadena de carga y ganchos de acero
• Protección contra sobrecarga disponible
• Add this chain hoist to your cart now

Medidor con pinza

MIG Welder Suitcase Kit, MPA

• Include high-frequency arc starter and stabilizer
• Enhances flexibility and performance
• Amplía la capacidad del equipo
• Unidad portátil
• Uses: Ideal for MIG or gas metal arc welding (GMAW)
• Add this MIG welder to your cart now

Espejo, inspección

Multiprocess CC Arc Welder DC to AC Inverter, 350 amp

• Converts DC to AC power for multiple welding applications
• 348 A
• Portátil con manijas
• Low amp operation available
• Uses: Ideal for worksites using multiple types of metal and requires use of stick, MIG, TIG, FCAW, and CAC-A welding
• Add this mulitprocess CC arc welder DC to AC rectifier to your cart

Orbital Floor Sander, 5 in., Electric Powered

• Parte superior y empuñadura en el cuerpo de la herramienta texturadas y antideslizantes
• Parte superior y empuñadura en el cuerpo de la herramienta texturadas y antideslizantes
• High-capacity dust bag available
• 5" sanding width
• Uses: Ideal for complete leveling and sanding for remodeling or construction purposes
• Add this orbital sander to your cart now

Orbital Floor Sander, Electric Powered

• Diseño de baja vibración
• Empuñadura cómoda para el operador
• Liviana y fácil de usar
• Ideal for heavy-duty sanding
• Uses: Ideal for heavy-duty sanding on hardwood flooring
• Add this orbital sander to your cart now

Outdoor Work Light String, 12V Explosion Proof

• Bulb cases included
• Explosion proof durability
• Ideal for industrial applications
• Up to 5 light bulb sockets
• Add this work light string to your cart now

Pipe Bender, 1/2 in. to 2 in., Electric Powered, Programmable

• Strong components can handle 1/2"- to 2"-gauge pipe
• Programmable
• Idóneo para hacer codos, ajustes y monturas
• Cart travels well on wheels for increased convenience
• Uses: Ideal for bending pipes or conduit for elbows or offsets between 1/2" to 2" gauge
• Add this pipe bender to your cart now

Pipe Bender, 2-1/2 in. to 4 in., Hydraulic

• Strong components can handle 2-1/2"- to 4"-gauge pipe
• Convenient extendable workspace
• Heavy-duty hydraulic power
• Idóneo para hacer codos, ajustes y monturas
• Uses: Ideal for bending pipes 2-1/2" to 4" gauge where hydraulic power is available
• Add this hydraulic pipe bender to your cart now

Pipe Beveling Manual Saddle Machine, 12-20 in.

• For shop or field applications
• Precision spacer bolts, located on both sides of saddle
• Can be used with most oxy/fuel or plasma machine torches
• Use to create the angle formed between the edge of the end of a pipe or tube
• Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
• Add this pipe beveling manual saddle machine to your cart

Pipe Beveling Manual Saddle Machine, 20-26 in.

• For shop or field applications
• Precision spacer bolts, located on both sides of saddle
• Can be used with most oxy/fuel or plasma machine torches
• Use to create the angle formed between the edge of the end of a pipe or tube
• Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
• Add this pipe beveling manual saddle machine to your cart

Pipe Beveling Manual Saddle Machine, 6-12 in.

• For shop or field applications
• Precision spacer bolts, located on both sides of saddle
• Can be used with most oxy/fuel or plasma machine torches
• Use to create the angle formed between the edge of the end of a pipe or tube
• Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
• Add this pipe beveling manual saddle machine to your cart

Abrazadera de línea de tubo de hasta 1"-8"

Abrazadera de línea de tubo de hasta 10"-36"

Abrazadera de línea de tubo de hasta 14"-24"

Abrazadera de línea de tubo de hasta 6"-12"

Pipe Conduit Bender Table, 4 in., Greenlee 881

• Strong components can handle up to 4"-gauge pipe
• Convenient extendable workspace
• Locking swivel wheels
• Conveniently adjust the ram to accommodate different sizes of conduit
• Uses: Ideal for bending rigid conduit on the go
• Add this pipe bender table to your cart now

Pipe Dolly

• Enables one operator to lift up to 2,000 lbs.
• Accommodates long and short pipes and conduit
• Fits through most standard doorways
• Heavy-duty and reliable construction
• Uses: Ideal for manually transporting lengths of pipe and conduit to the correct location for pipe fitting
• Add this pipe dolly to your cart now

Pipe Fusion Machine 6-18 in., Tracks Included

• Fuse small- to medium-diameter pipes or conduit together
• Tracks included for setup in muddy or wet conditions
• Designed for fusing 6"-18" diameter polyethylene pipes
• For utilities work such as sewer or plumbing pipes
• Uses: Ideal for fusing polyethylene pipes together for utility work in muddy or wet conditions
• Add this pipe fusion machine to your cart now

Pipe Fusion Machine 6-18 in., Wheels Included

• Fuse small- to medium-diameter pipes or conduit together
• Wheeled chassis included for maneuvering around the jobsite
• Designed for fusing 6"-18" diameter polyethylene pipes
• For utilities work such as sewer or plumbing pipes
• Uses: Ideal for fusing polyethylene pipes together for utility work
• Add this pipe fusion machine to your cart now

Medidores todoterreno de tubos

• Conveniently battery powered
• Inspect the coatings of piping and conduit for holes
• Designed to read voltages even in rainy conditions
• Volt cable included
• Uses: Detect holes in coatings of pipes or conduit
• Add this jeep meter to your cart now

Láser de tubo

• Steep grade option available, "rake-in" up to 100%
• Line range of 20 degrees
• Variación de grado de 15 % a +40 %
• Fácil de usar
• Uses: Inspect piping or conduit for grade
• Add this pipe laser to your cart now

Pipe Roller, Horizontal Beam, 24 in.

• Pipe diameter 24"
• Two rollers
• Estructura de acero para uso intensivo
• Two rollers
• Uses: Ideal for horizontal conveyance of pipes up to 24" wide
• Add this pipe roller to your cart now

Pipe Threader, 1/2 in. to 2 in., Portable, 115V Electric Powered

• Capacidad del tubo: 1/8"-2" (3mm-50mm) pipe, 2-1/4"-4" with 141, and 4"-6" with 161 geared threaders; 1/4"-2" (6mm-50mm) rod
• 115V, 38 RPM
• Rear-centering device: La leva se gira con un portabrocas
• Interruptor de encendido, apagado y reversa empotrado
• Uses: Thread 1/2" to 2" gauge pipe in the shop or on-site
• Add this pipe threader to your cart now

Pipe Threader, 1/2 in. to 4 in., Electric Powered

• Capacidad de roscado de 1/2" a 4"
• Lubricación continua de los troqueles y de la pieza de trabajo con aceite que pasa por los cabezales
• Estructura reforzada para servicio pesado
• Práctico interruptor de pedal integral
• Uses: Thread 1/2" to 4" gauge pipe or conduit in the field or in the shop
• Add this pipe threader to your cart now

Llave para tubo de 10"

Llave para tubo recta de 10", aluminio

Llave para tubo de 12"

Llave para tubo recta de 14", aluminio

Llave para tubo recta de 14", uso intensivo

Llave para tubo de 18"

Llave para tubo recta de 18", aluminio

Llave para tubo de 24"

Llave para tubo recta de 24", aluminio

Llave para tubo de 36"

Llave para tubo recta de 36", aluminio

Llave para tubo de 48", a granel

Llave para tubo recta de 48", aluminio

Llave para tubo de 6"

Llave para tubo de 8"

Llave de cadena para tubo

Llave de correa para tubo de 8"

Plate Clamp, 3 Ton, Positive Lock

• Forged head and gearing
• 2-to-1 safety factor
• Durable high-grade steel construction
• Industrial-strength coated finish
• Uses: Ideal for heavy lifting
• Add this plate clamp to your cart today

Alicates de presión de 11", en C

Portable Band Saw, Electric Powered

• Corta hasta 3-3/4" en materiales rectangulares y redondos
• Con una velocidad de cuchilla constante y óptima
• Features all ball and roller bearing construction
• Low vibration for increased comfort
• Uses: Ideal as your go-to tool for remodeling, construction when working with plates, pipes and other jobsite materials
• Add this band saw to your cart now

Portable Drum Fan, 42 in.

• High-capacity fan blasts hot, stagnant air from large areas
• Complete metal housing with spiral wire safety guards
• Aluminum blades
• Able to tilt and direct air
• If you’re ready to rent this product, set your location to add it to your cart. If you need assistance, click the orange “Request Information” button to contact a Climate Solutions representative.

Portable Hydraulic Power Pack and Pump

• Provide hydraulic power to other equipment and tools
• Rango de presión de 2,100-20,000 PSI
• Output up to 8 gallons per minute (GPM)
• Kit de ruedas disponibles para facilitar su transporte
• Uses: Take portable hydraulic power to your worksite to plug in hydraulic tools
• Add this hydraulic power pump to your cart now

Portable Indoor/Outdoor Evaporative Cooling Fan, 24-36 in.

• Recommended for stage events, hospitality tents and auto repair shops
• Variable speeds
• Built-in water tanks for portable cooling or connect to a garden hose for all-day use
• Evaporative cooler uses approximately the same amps as a standard wet/dry vacuum
• If you’re ready to rent this product, set your location to add it to your cart. If you need assistance, click the orange “Request Information” button to contact a Climate Solutions representative.

Portable Masonry and Tile Saw, Gas- or Electric-powered, 14 in. or 20 in.

• 14" and 20" blade guard capacity models available
• Standard rear-wheel dolly design and removable legs make transport and setup easy
• Rugged jig-welded frame
• Stay-level blade guard allows for full depth of cut
• Add this portable masonry and tile saw to your cart

Portable Straight Grinder, 2-1/2 in.

• Carcasa con recubrimiento de husillo para un agarre más frío
• Hasta 14,500 rpm
• 2-1/2"-3" diameter wheel
• Hand-held grinder for narrow areas such as inside piping, for buffing and more
• Uses: Ideal for grinding or buffing in narrow areas
• Add this portable grinder to your cart now

Portable Ventilating Blower, Electric-powered, 12 in. Axial Fan, 115V-230V

• For use in large, confined spaces
• Lightweight, portable and durable
• Bottom enclosure to protect electrical components 
• Super quiet 
• Add this portable ventilating blower to your cart

Portable Ventilating Blower, Electric-powered, 20 in. Axial Fan, 115V-230V

• For use in large, confined spaces
• Lightweight, portable and durable
• Bottom enclosure to protect electrical components 
• Non-explosion-proof
• Add this portable ventilating blower to your cart

Portable Ventilating Blower, Electric-powered, 20 in. Axial Fan, 115V-230V

• For use in large, confined spaces
• Lightweight, portable and durable
• Bottom enclosure to protect electrical components 
• Explosion-proof
• Add this portable ventilating blower to your cart

Juego de destornilladores de precisión

Radio Repeater, Digital, 450MHz, Antenna, 100 ft. Transmission Line

• Expand the range of your compatible two-way radio
• With antenna
• Has a 100' transmission line
• Uses: Ideal for use with portable analog and digital radios

Trinquete, 1"

Trinquete de 3/4"

Trinquete de 3/8"

Eslabón de trinquete de 1 1/4", 243-1687 ft-lb

Eslabón de trinquete de 1 13/16", 243-1687 ft-lb

Eslabón de trinquete de 1 13/16", 580-3855 ft-lb

Eslabón de trinquete de 1 5/8", 243-1687 ft-lb

Eslabón de trinquete de 1 5/8", 580-3855 ft-lb

Eslabón de trinquete de 1 7/16", 243-1687 ft-lb

Eslabón de trinquete de 2 15/16", 580-3855 ft-lb

Eslabón de trinquete de 2 3/16", 243-1687 ft-lb

Eslabón de trinquete de 2 3/16", 580-3855 ft-lb

Eslabón de trinquete de 2 3/4", 580-3855 ft-lb

Eslabón de trinquete de 2 3/8", 243-1687 ft-lb

Eslabón de trinquete de 2 3/8", 580-3855 ft-lb

Eslabón de trinquete de 2 9/16", 580-3855 ft-lb

Eslabón de trinquete de 2", 243-1687 ft-lb

Eslabón de trinquete de 2", 580-3855 ft-lb

Eslabón de trinquete de 3 1/8", 1143-8151 ft-lb

Eslabón de trinquete de 3 7/8", 2010-13400 ft-lb

Reciprocating Saw, Cordless, Electric Powered

• High-powered motor
• 28V battery twice the runtime as 18V battery models
• 1-1/8" stroke length for fast cutting speeds
• La posición de la batería no interfiere con las capacidades de corte de inmersión
• Uses: Ideal as your go-to tool for remodeling, construction and demolition
• Add this reciprocating saw to your cart now

Reciprocating Saw, Electric Powered

• Práctico gatillo de velocidad variable
• Sistema para cambiar cuchillas sin herramientas
• Liviana y fácil de usar
• Empuñadura ergonómica
• Uses: Ideal as your go-to tool for remodeling, construction and demolition
• Add this reciprocating saw to your cart now

Ride-on Trencher, 32-50 HP, Rock Saw Wheel

• Forward and reverse ground drive
• Tier 4 diesel engine
• Hydraulic ground drive pump and attachment pump available
• United Rentals will contact you to confirm requirements
• Uses: Ideal for sawing through rocks, tree stumps and more for trenching
• Add this ride-on rock saw trencher to your cart now